E-7
English
OPERATIONS
1
Set the recording mode of RX-E100 and other
components.
2
Press
MODE
to select the reverse mode.
Each time you press
MODE
, the reverse mode
changes and the corresponding mode indicator lights
up as follows:
: One side of the tape is recorded.
: Both sides of the tape are recorded.
3
Press
DIRECTION
to change the direction of the
tape.
• If you place the tape on the tray with side A
upward,
#
indicates recording side A and
@
indicates recording side B.
4
Press
REC/PAUSE
.
The unit turns into standby mode for recording and
the REC indicator flashes.
5
Adjust the recording level by turning
REC LEVEL
.
For the best results, play the loudest passage of the
source to be recorded and watch the recording level
meter in the display. Adjust
REC LEVEL
so that the
highest peak causes the +2 dB level indicators to
flicker.
When recording a CD, use Peak Level Search on
CDX-E100 for the optimum adjustment.
6
Select the noise reduction type using
DOLBY NR
if
necessary.
7
Press
#
.
MAX
MIN
REC LEVEL
DOLBY NR
REC/
PAUSE
MODE
COUNTER
RESET
DIRECTION
NATURAL SOUND STEREO CASSETTE DECK KX-E100
STANDBY/ON
DOLBY B-C NR
8
Start playing the source component.
• Synchronized start is possible if you have
connected the CD player, CDX-E100 or MD
recorder, MDX-E100 to this unit. Press
^
on
MDX-E100 or CDX-E100 after step 6. Recording
begins automatically.
To pause recording
Press
REC/PAUSE
.
To resume recording, press
#
.
To stop recording
Press
&
.
Note
• When you record on
@
direction of the tape, the unit stops
recording after recording the side of the tape regardless of the
reverse mode setting in step 2.
The tape counter
The tape counter is useful for searching and locating a
certain point on the tape. Pressing
COUNTER RESET
will reset the tape counter to “0000”.
Recording
COUNTER RESET
REC/PAUSE
MODE
REC LEVEL
DOLBY NR
DIRECTION
