9-35
9
22. Pour additional coolant into the radiator until
it is full.
23. Stop the engine and allow it to cool. If the
coolant level has dropped after the engine
has cooled, add sufficient coolant until it
reaches the top of the radiator, and then in-
stall the radiator cap.
24. Start the engine, and then check for coolant
leakage.
TIP
If any leakage is found, have a Yamaha dealer
check the cooling system.
25. Install the V-belt cooling duct, and then tight-
en the clamp screw.
26. Install the footboard by installing the bolts
and nuts, and then tighten them to the speci-
fied torques.
TIP
Tighten footboard bolts B in the order shown.
1. Footboard nut
2. Footboard bolt A
3. Footboard bolt B
3
1
2
1
UB5K12E0.book Page 35 Thursday, April 23, 2020 2:45 PM
