15
En
USING THE ALARM FUNCTION
Eng
lish
Note
The alarm setting will be erased if the system is turned off without properly
completing it.
1
Press and hold
ALARM
.
The alarm indicator (
) and set alarm time will flash.
2
Press
/
to set the alarm time.
3
Select the alarm type with the
ALARM TYPE
switch on the rear panel.
For details on alarm types, refer to P. 14.
4
(when alarm types other than BEEP are selected)
Press
SOURCE
to select music source.
Sources other than AUX and
Bluetooth
can be selected.
Notes
• If iPod/CD/USB has been selected, connect/insert the audio source
(iPod, audio/data CD, USB device) to the unit.
• If source cannot be played back at the time set for the alarm (eg. iPod
is not connected), the beep sound is played back.
5
(when alarm types other than BEEP are selected)
Specify the track, folder or FM station to be played.
If iPod is set as the source:
No settings required.
If CD/USB/FM is selected as the source:
Press
PRESET
to select the track (audio CD), folder (data
CD/USB devise) or FM station to be played.
y
• When iPod is set as the source, the unit plays back the “ALARM
Yamaha DTA” playlist at the set alarm time. If this playlist cannot be
found within the iPod, the unit resumes play from the last track you
played (resume).
• When CD/USB/FM is selected as the source and “0” is set, the
playback resumes from the track/FM station you listened to last time
(resume).
6
Set the alarm volume by pressing
VOLUME
–/+
.
7
Press
ALARM
to complete setting the alarm.
The alarm will be set, and the alarm indicator (
) will
light up.
Set the alarm time and alarm type
Using the remote control
Press /
.
Using the remote control
Press Source button to select music source.
AUTO
SET
BEEP
BEEP
SOURCE
DIMMER
CLOCK
ALARM TYPE
2
1
2
1
VOLUME
USB
LABEL SIDE
SOURCE
PRESET
ALARM
SNOOZE SLEEP
17
2
4
6
5
Top panel
Alarm indicator
Alarm time
BEEP
BEEP
SOURCE
Rear panel
Using the remote control
Press
PRESET
/
.
Alarm volume
