43
TOOLS for i88X/mLAN16E, TOOLS for MY16-mLAN, Plug-in Effect
Installation Guide
English
• ** will be the name of the mLAN device you’re using.
Display Messages
Messages
Page
Can’t find the ** on the mLAN network.
Make sure that the ** is turned on and that the mLAN cable connection is correct and
secure. After that, restart “mLAN Auto Connector”.
The settings of the mLAN Driver could not be changed.
1) If an application that uses the driver is currently active, close it first, then change
the settings.
2) There is not enough resource memory.
Failed to initialize the mLAN settings because the application “mLAN Start” is not run-
ning.
Select “ON” from the menu of “mLAN Manager” application.
Can’t connect the **’s mLAN audio output connector to the computer’s mLAN audio
input connector.
Can’t connect the **’s mLAN MIDI output connector to the computer’s mLAN MIDI
input connector.
Can’t connect the computer’s mLAN MIDI output connector to the **’s mLAN MIDI
input connector.
Can’t connect the computer’s mLAN wordclock output connector to the **’s mLAN
wordclock input connector.
Can’t connect the **’s mLAN wordclock output connector to the computer’s mLAN
wordclock input connector.
A new 1394 adaptor card has been found.
If you’ve inserted a new card, restart the computer.
There is not enough resource memory.
Execute mLAN Stop, then execute mLAN Start again. If this fails, restart the computer.
The 1394 adaptor card has not been found.
Check the card and start mLAN again.
One of the programs could not be started. Follow the instructions/messages in the
appropriate application. If there are no messages, execute mLAN Start again or restart
the computer.
The application is not responding.
Execute mLAN Start again or restart the computer.
Failed to load the mLAN Bus Driver.
If the New Hardware Wizard has not been run, use it to install the hardware, then exe-
cute mLAN Start.
One or more programs could not be closed.
After quitting all DAW programs and any programs using mLAN, execute mLAN Stop.
