Yamaha HTR5930B Owner'S Manual Download Page 8

Page: 8 / 74

CONTROLS AND FUNCTIONS

The XM Satellite Radio controlling functions in the following buttons (SEARCH MODE, XM, CATEGORY, PRESET/TUNING/CH

, MEMORY, and DISPLAY) are only applicable to the U.S.A. model and are operational only when “XM” is selected as the

input source. For details, see “XM Satellite Radio controls and functions” on page 42.

STANDBY/ON

Turns on this unit or sets it to the standby mode.

• In the standby mode, this unit consumes a small amount of

power in order to receive infrared-signals from the remote
control.

• When you turn on this unit, there will be a 4 to 5-second delay

before this unit can reproduce sound.

Remote control sensor

Receives signals from the remote control.

PRESET/TUNING

• Switches the function of PRESET/TUNING/CH

between selecting preset station numbers and selecting
the tuning frequency.

• Edits the assignments of present stations.

FM/AM

Switches the reception band between FM and AM.

A/B/C/D/E

Selects one of the 5 preset station groups (A to E) when
“FM” or “AM” is selected as the input source.

PRESET/TUNING/CH

• Selects one of the 8 preset station numbers (1 to 8)

when “FM” or “AM” is selected as the input source.
The colon (:) is displayed in the front panel display.

• Selects the tuning frequency when “FM” or “AM” is

selected as the input source. The colon (:) is not
displayed in the front panel display.

Front panel display

Shows information about the operational status of this unit.

MEMORY

Stores a preset station in the memory. Hold down this
button for more than 3 seconds to start automatic preset
tuning.

TUNING MODE

Switches between automatic tuning (the AUTO indicator
is turned on) and manual tuning (the AUTO indicator is
turned off).

VOLUME

Controls the output level of all audio channels.

This does not affect the AUDIO OUT (REC) level.

CONTROLS AND FUNCTIONS

Front panel

Note

PRESET/TUNING/CH

VOLUME

STANDBY

/ON

PHONES

SILENT CINEMA

SPEAKERS

A/B/OFF

FM/AM

PRESET/TUNING

A/B/C/D/E

NEXT

AUTO/MAN'L

MAN'L/AUTO FM

MEMORY

TUNING MODE

EFFECT

STRAIGHT

TONE CONTROL

BASS/TREBLE

PROGRAM

EDIT

INPUT MODE

INPUT

MULTI CH INPUT

SET MENU

SEARCH MODE

CATEGORY

DISPLAY

C D

3 4

6 7

(U.S.A. model)

Notes

Note

Summary of Contents for HTR5930B











































































Search results

Summary of Contents for HTR5930B

Reviews:

Related manuals for HTR5930B

Brands by name

Popular brands

Yamaha HTR5930B, Owner'S Manual

Search results

Summary of Contents for HTR5930B

Reviews:

Related manuals for HTR5930B

Brands by name

Popular brands