34
En
Setting the option menu for each input source (OPTION menu)
■
Decoder Mode
Selects DTS digital audio signals for reproduction.
■
EXTD Surround
Selects whether to reproduce multi-channel input signals
in 6.1- or 7.1-channel when surround back speakers are
used.
Signal Info
Displays information on audio and video signals on the
front panel display. You can change items to be displayed
using
n
Cursor
k
/
n
.
■
Audio information
Notes
•
“No Signal” is displayed when no signals are input and “---” is displayed
when signals that this unit cannot recognize are input.
•
The bit rate may vary during playback.
■
Video information
HDMI error information
(appears only when an error has occurred)
■
FM Mode
Sets FM broadcasting receiving mode.
Input source:
HDMI1-4, AV1-4
Choices:
Auto
*/
DTS
Auto
Automatically selects audio input signals.
DTS
Selects DTS signals only. Other input signals
are not reproduced.
Input source:
HDMI1-4, AV1-4
Choices:
Auto
*/
PLIIxMovie
/
PLIIxMusic
/
EX/ES
/
Off
Auto
Automatically selects the most suitable
decoder according to whether a flag for
reproducing surround back channel is present,
and reproduces the signals in 6.1- or 7.1-
channel.
PLIIx
Movie
Always reproduces signals in 6.1- or 7.1-
channel using the PLIIxMovie decoder
whether or not surround back channel signals
are contained. You can select this parameter
when one or two speakers are connected.
PLIIx
Music
Always reproduces signals in 6.1- or 7.1-
channel using the PLIIxMusic decoder whether
or not surround back channel signals are
contained. You can select this parameter when
one or two speakers are connected.
EX/ES
Automatically selects the most suitable
decoder for input signals whether or not the
flag for reproducing surround back channel is
present, and always reproduces signals in 6.1-
channel.
Off
Always reproduces signals in 5.1-channel
whether or not the flag for reproducing
surround back channel is present.
Input source:
HDMI1-4, AV1-4
Signal Info parameters
Information Description
Format of digital audio signals.
The number of input signal channels (front/
surround/LFE).
For example, if input signal channels are 3
front channels, 2 surrounds and LFE, “3/2/
0.1” is displayed.
If a channel that cannot be expressed as the
above, a total number of channels such as
“5.1ch” may be displayed.
The sampling frequency per second in
analog-to-digital conversion.
The bit rate of input signal per second.
Information Description
Format and resolution of video input signal.
Format and resolution of video output signal.
Information Description
Error messages about HDMI signals and
HDMI components.See the following for
details of the error messages.
HDCP Error
HDCP authentication failed.
Device Over
The number of HDMI components
connected is over the limit.
Input source:
TUNER
Choices:
Stereo
*/
Mono
Stereo
Receives in stereo mode.
Mono
Receives in monaural mode. You can get better
reception in MONO mode.
