Yamaha HTR-6150, Service Manual

Page: 30 / 114

30
RX-V563/HTR-6150/DSP-AX563
RX-V563/HTR-6150/
DSP-AX563
E. MIC CHECK
The signals input through the microphone are output of FRONT L/R via A/D and D/A.
E1.MIC CHECK
F 1 . V F D C H E C K
Checking FL display section
Initial display
All segments OFF
All segments ON (dimmer 100 %)
All segments ON (dimmer 50 %)
Lighting of segments in lattice
Check of the Video control section. (Monitor out)
Initial display (OSD OFF)
OSD OFF
OSD characters ON
OSD characters ON
OSD characters ON
Lighting in lattice
Normal Short
OSD characters
F. FL CHECK
Use this program to check the FL display section and video control section. When checking the video control
section, connect a TV monitor to this unit with a component video cable, S video cable and video pin cable.
Selection of the FL display section or video control section varies according to the submenu operation as shown
below.
For audio signal processing, use STRAIGHT.