Yamaha HTR-6150, Service Manual

Page: 18 / 114

18
RX-V563/HTR-6150/DSP-AX563
RX-V563/HTR-6150/
DSP-AX563
Fig. 2
"SPEAKERS A/B/OFF" key
"MAIN ZONE ON/OFF" key
(RX-V563, HTR-6150)
"STANDBY/ON" key
(DSP-AX563)
* When the version of the firmware to be written is the same as the one existing in this unit, “Same Version”,
“Please...” and “Turn off!!” are displayed repeatedly. (Upgrading is not necessary.)
If the display remains unchanged for more than 10 seconds after starting the firmware CD play procedure, per-
form the firmware CD play procedure again from the beginning.
If “FILE CORRUPTED” is displayed after “Address:XXXXXX”, make sure that the firmware CD is not corrupted
and perform steps 1 to 8 of “Operation Procedures” again.
If “Upgrade Failed” is displayed, perform Steps 1 to 8 of “Operation Procedures” again.
Writing is completed. Writing is started.
Fig. 3
FIRMWARE UPDATE mode
SPDIF Upgrade
Address:XXXXXX Upgrade OK
Please...
Turn off!!
XXXXXX
: Address information of the received data
2. While simultaneously pressing the “MAIN ZONE ON/OFF” (RX-V563, HTR-6150) / “STANDBY/ON” (DSP-AX563)
and “SPEAKERS A/B/OFF” keys of this unit, connect the power cable of this unit to the AC outlet. (Fig. 2)
The FIRMWARE UPDATE mode is activated and “SPDIF Upgrade” is displayed. (Fig. 2)
3. Connect the power cable of DVD/CD player to the AC outlet.
4. Press the “STANDBY/ON” key of the DVD/CD player.
5. Press the “EJECT” key of the DVD/CD player to open the disc tray.
6. Place the firmware CD in the disc tray and close the disc tray.
7. Press the “PLAY” key of the DVD/CD player.
Then writing of the firmware is started. (Fig. 3)
8. When writing of the firmware is completed, “Upgrade OK”, “Please...” and “Turn off!!” are displayed repeatedly. (Fig. 3)