56
En
XM Satellite Radio tuning
You can use this feature to store up to 40 XM Satellite
Radio channels (A1 to E8: 8 preset channel numbers in
each of the 5 preset channel groups). You can then recall
any preset channel easily by selecting the preset channel
group and number as described in “Preset Search mode”
on page 55.
1
Search for a channel you want to set as a
preset channel by using one of the XM
Satellite Radio search modes.
See “Basic XM Satellite Radio operations” on
page 54 for details.
2
Press
6
MEMORY
(or
E
XM MEMORY
).
The MEMORY indicator flashes in the front panel
display for approximately 10 seconds.
You must proceed to and carry out steps 3 through 5 while
the MEMORY indicator is flashing in the front panel
display.
3
Press
4
CATEGORY
(or
D
A-E/CAT.
l
/
h
)
repeatedly to select a preset channel group
(A to E) while the MEMORY indicator is
flashing.
The preset channel group letter appears in the front
panel display.
4
Press
5
PRESET/TUNING/CH
l
/
h
(or
D
PRESET/CH
k
/
n
) repeatedly to select
a preset channel number (1 to 8) while the
MEMORY indicator is flashing.
The preset channel number appears in the front panel
display.
5
Press
6
MEMORY
(or
E
XM MEMORY
) to
set the selected XM Satellite Radio channel
as a preset channel while the MEMORY
indicator is flashing.
A colon (:) appears next to the preset channel number
for confirmation, and the MEMORY indicator turns
off in the front panel display.
Once you set a new preset channel, the one previously
stored in the same preset channel group and number is
cleared.
Before performing the following operations, set the operation
mode selector on the remote control to
K
SOURCE
.
Setting the XM Satellite Radio
preset channels
Note
[043] XMU
Currently selected channel number
MEMORY
Flashes
Note
C [043] XMU
MEMORY
Currently selected preset channel group
Flashes
C5 [043] XMU
MEMORY
Currently selected preset channel number
Flashes
C5:[043] XMU
Colon (:)
