Yamaha HTR-3065 Owner'S Manual Download Page 44

Page: 44 / 83

PLAYBACK

➤

Playing back iPod music

You can play back iPod music on the unit using a USB cable
supplied with the iPod.

• This manual describes both the “iPod” and “iPhone” as the “iPod”. “iPod” means

both “iPod” and “iPhone” unless otherwise specified.

• Some features may not be compatible, depending on the model or software

version of the iPod.

• To play back iPod videos on the unit, an Apple Composite AV Cable (not supplied)

is required. Connect the USB and composite video plugs of the Apple Composite
AV cable to the USB jack and VIDEO AUX (VIDEO) jack of the unit, and connect
your TV and the unit with a video pin cable (p.22).

Connecting an iPod

Connect your iPod to the unit with the USB cable supplied with the
iPod.

Connect the USB cable to the iPod.

Connect the USB cable to the USB jack.

• The iPod charges while it is connected to the unit. If you set the unit to

standby mode while the iPod is connected, the iPod continues to charge (up
to 4 hours).

Playing back iPod music

Supported iPods (as of October 2011)

• iPod touch, iPod nano (2nd gen. to 6th gen.), iPod classic

• iPhone 4S, iPhone 4, iPhone 3GS, iPhone 3G, iPhone

VIDEO

VOLUME

AUX

TRAIGHT

RADIO

VIDEO

iPod/iPhone 5V

AUDIO

The unit (front)

VOL.

iPodConnected

USB

Summary of Contents for HTR-3065




















































































Search results

Summary of Contents for HTR-3065

Reviews:

Related manuals for HTR-3065

Brands by name

Popular brands

Yamaha HTR-3065, Owner'S Manual

Search results

Summary of Contents for HTR-3065

Reviews:

Related manuals for HTR-3065

Brands by name

Popular brands