Fig. 6
Fig. 5
⑪
⑩
⑩
⑩
G3
Ground lead
Heatsink
MAIN (1) P.C.B.
Ground lead
Chassis
Rear panel
When checking the MAIN (1) P.C.B.
a. Remove the top cover. (Fig. 1)
b. Remove 3 screws (
⑨
). (Fig. 3)
c. Remove 5 screws (
⑩
) and 4 screws (
⑪
). (Fig. 5)
d. Place the P.C.B.s (with rear panel) upright. (Fig. 6)
e. Connect the heatsink, rear panel and MAIN (1) P.C.B. (G3) to the chassis with a ground lead or the like. (Fig. 6)
When checking the DIGITAL P.C.B.
• Put the rubber sheet and cloth over this unit, and place the DIGITAL P.C.B. on them. (Fig. 4)
• Connect ST201 on DIGITAL P.C.B. to the chassis with a ground lead or the like. (Fig. 4)
• Reconnect all cables (connectors) that have been disconnected. Be sure to use the P.C.B. CHECKING JIG (Part No.
WW483800) to connect between the following connectors.
CB263 on DIGITAL P.C.B. – CB196 on OPERATION (4) P.C.B.
CB264 on DIGITAL P.C.B. – CB195 on OPERATION (4) P.C.B.
• When connecting the flexible flat cable, be careful with polarity.
Fig. 4
DIGITAL P.C.B.
OPERATION (4) P.C.B.
P.C.B. CHECKING JIG
CB263
CB264
CB196
CB195
Rubber sheet and cloth
ST201
Ground lead
Chassis
19
RX-V371/HTR-3064
RX-V371/HTR-3064
Summary of Contents for HTR-3064 Series
