8-1. TEST
ALL
The test noise is output to all channels.
8. MANUAL
TEST
The built-in noise generator of DSP outputs the test noise through the channels specified by using the sub-menu.
8 . T E S T A L L
9. A/D DATA CHECK
This menu is used to display the A/D conversion value of the microprocessor which detects panel keys and protection
functions by using the sub-menu.
When “9-5. K1/K2” menu is selected, keys become inoperable due to detection of the values of all keys.
However, it is possible to advance to the next menu by turning the “VOLUME” knob.
*
Numeric values in the figure are given as reference only.
9-1. PS/DC
PS:
Power supply voltage protection detection
Detected:
AC2, ±12A, S9, +7D, +5A, -VP
Detection port:
93 pin (PS_PRT)
Normal value:
101 to 155
(Reference voltage: 3.3 V=255)
DC:
Power amplifier DC (DC voltage) output is detected.
Detection port:
87 pin (DC_PRT)
Normal value:
30 to 70
(Reference voltage: 3.3 V=255)
*
If PS or DC becomes out of the normal value range, the protection function works to turn off the power.
P S : 1 2 6 D C : 0 5 8
Test noise
for SUBWOOFER
30 Hz to 80 Hz, pink noise
for other than SUBWOOFER
500 Hz to 2 kHz, pink noise
37
HTR-2064/NS-B20/NS-C20/NS-SWP20
HTR-2064/NS-B20/
NS-C20/NS-SWP20