Yamaha GW50, Owner'S Manual

Page: 58 / 166

49
EFFECT SECTION
MANUAL MODE
3.
The LED stops flashing and remains lit when
the fade up is complete and the volume is at
maximum.
HINT
Applications of this would include imitating
the slow attack of other instrument sounds
like a softly-bowed violin, or a pedal steel
guitar. Since Auto Volume cuts off the pick-
ing sound and slowly brings up the level, it
is ideal for playing soft, lyrical solos.
Note: The low volume of this function (or the
level at which the fade in starts) is deter-
mined by the Minimum Volume parameter.
(See page 47.)
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
Setting the AUTO VOLUME Rate —
AUTO VOL
When using the ASSIGNABLE Block Pedal
Switch to control the Auto Volume (see page 48),
this parameter determines the rate (speed) at which
the volume automatically fades up.
Operation —
1.
From the Manual mode, repeatedly press the
Utility button until “
AT VOL
” is shown in
the display.
2.
Use the [–]/[+] buttons to set the desired
Auto Volume Rate. (Range: 1–10)
A minimum setting of “1” results in a slow
fade in, while a maximum of “10” results in a
nearly instantaneous return to normal level.
(See the graph below.)
MANUAL JOB MODE
When LED stops
flashing, volume
reaches maximam.
Press and hold
Pedal Switch Release Pedal
Switch
LED flashes
Level
Maximum
(normal)
volume
Volume
pedal position
Minimum
volume
Switch is pressed.
Rate = 10
Switch is released.
Rate = 1
Time
Sound is at
minimum volume
as long as Switch
is held.