manualshive.com logo in svg

Yamaha GW50, Owner'S Manual

Share
Download
Yamaha GW50 Owner'S Manual Download Page 104

 

 95

BACKING SECTION   

SONG MODE

Notice that this operation shifts all existing meas-
ures after measure B back toward the start of the
song.

HINT

DELETING ALL DATA OF A SINGLE SONG
The following operation can be used to delete all
the data of a song. Simply mark measure A to the
starting measure of the song and measure B to
the ending measure (measure with the last event)
(using [

n

] + [

v

] and/or [

/

] + [

m

] if necessary),

then delete the range of measures.

Naming Songs

Operation —

1.

Select the song to be named, or use the song
currently being recorded.

2.

Simultaneously hold down 

[SHIFT]

 and press

[SONG NAME]

.

3.

Use the 

[–]/[+]

 buttons to select the desired

character at the cursor position. Use 

[

6

CURSOR]

 to move the cursor (

<

) in the

display. The following characters are avail-
able for naming:

4.

Press any of the mode buttons to exit the
operation. The name is automatically saved
to the song and briefly appears whenever the
song is selected.

RESTORING FACTORY PRESET SONGS

If you’ve erased one of the factory songs
by replacing it with one of your own
creation, this function lets you restore
the original song.

Operation —

1.

Turn off the power of the GW50.

2.

Simultaneously hold down 

[SONG]

 and turn

the power back on. (The SONG LED lights
and “

LD SONG

” appears in the LCD.)

3.

Select the number of the song you wish to
restore with the 

[–]/[+]

 buttons.

RESTORING FACTORY PRESET SONGS

5

10

15

20

25

Measures to 

delete

Original measures 21 – 24
are moved back toward the 
start of the song to fill space
left by delete operation. 

5

10

15

20

25

Before deleting

After deleting

Measures

Measures

Cursor

Summary of Contents for GW50







































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands