Yamaha Grizzly 700 YFM7FGPA Owner'S Manual Download

Page: 152 / 172

10-1

EBU25960

SPECIFICATIONS

Dimensions:

Overall length:

2065 mm (81.3 in)

Overall width:

1180 mm (46.5 in)

Overall height:

1240 mm (48.8 in)

Seat height:

905 mm (35.6 in)

Wheelbase:

1250 mm (49.2 in)

Ground clearance:

275 mm (10.8 in)

Minimum turning radius:

3200 mm (126 in)

Weight:

With oil and fuel:

294.0 kg (648 lb)

Engine:

Engine type:

Liquid cooled 4-stroke, SOHC

Cylinder arrangement:

Forward-inclined single cylinder

Displacement:

686 cm³

Bore

stroke:

102.0

84.0 mm (4.02

3.31 in)

Compression ratio:

9.20 :1

Starting system:

Electric starter

Lubrication system:

Wet sump

Engine oil:

Recommended brand:

YAMALUBE

Type:

SAE 5W-30, 10W-30, 10W-40, 15W-40, 20W-40 or 20W-
50

Recommended engine oil grade:

API service SG type or higher, JASO standard MA

110

130 ˚F

–20

–10

50 ˚C

SAE 5W-30

SAE 10W-30

SAE 10W-40

SAE 15W-40

SAE 20W-40

SAE 20W-50

U1DT10E0.book Page 1 Monday, March 15, 2010 10:51 AM

Summary of Contents for Grizzly 700 YFM7FGPA













































































































































































Search results

Summary of Contents for Grizzly 700 YFM7FGPA

Reviews:

Related manuals for Grizzly 700 YFM7FGPA

Brands by name

Popular brands

Yamaha Grizzly 700 YFM7FGPA, Owner'S Manual

Search results

Summary of Contents for Grizzly 700 YFM7FGPA

Reviews:

Related manuals for Grizzly 700 YFM7FGPA

Brands by name

Popular brands