Yamaha GRIZZLY 700 FI YFM7FGPY Owner'S Manual Download

Page: 145 / 164

8-62

NOTICE

ECB00670

Make sure the headlight bulb holder cover is
securely fitted over the bulb holder and seated
properly.

9. Adjust the headlight beam if necessary.

EBU25551

Adjusting a headlight beam

NOTICE

ECB00690

It is advisable to have a Yamaha dealer make
this adjustment.

To raise a headlight beam, turn the headlight beam
adjusting screw in direction (a).
To lower a headlight beam, turn the adjusting
screw in direction (b).

EBU25641

Replacing the tail/brake light bulb

If the tail/brake light bulb burns out, replace it as
follows.

1. Remove panel I. (See page 8-8.)
2. Remove the bulb holder (together with the

bulb) by turning it counterclockwise.

1. Headlight beam adjusting screw

U43P61E0.book Page 62 Friday, October 17, 2008 2:18 PM

Summary of Contents for GRIZZLY 700 FI YFM7FGPY





































































































































































Search results

Summary of Contents for GRIZZLY 700 FI YFM7FGPY

Reviews:

Related manuals for GRIZZLY 700 FI YFM7FGPY

Brands by name

Popular brands

Yamaha GRIZZLY 700 FI YFM7FGPY, Owner'S Manual

Search results

Summary of Contents for GRIZZLY 700 FI YFM7FGPY

Reviews:

Related manuals for GRIZZLY 700 FI YFM7FGPY

Brands by name

Popular brands