Yamaha GRIZZLY 550 FI YFM5FGY Page 57 Owner'S Manual Download

Page: 57 / 168

6-3

3. Release the brake pedal, and then open the

throttle lever gradually.

Shifting: Neutral to Reverse and Reverse to
Park

TIP

The drive select lever cannot be shifted into or from
reverse or park without applying the brake pedal.

1. Bring the ATV to a complete stop.

2. Apply the brake pedal.
3. Shift from neutral to reverse or from reverse to

park and vice versa by moving the drive select
lever along the shift guide.

TIP

●

When in reverse, the reverse indicator light
should come on. If the indicator light does not
come on, have a Yamaha dealer check the elec-
trical circuit.

1. Drive select lever

2. L (Low-range)

3. H (High-range)
4. N (Neutral)

5. R (Reverse)

6. P (Park)

1. Drive select lever

2. L (Low-range)

3. H (High-range)
4. N (Neutral)

5. R (Reverse)

6. P (Park)

U28P60E0.book Page 3 Thursday, April 17, 2008 8:51 AM

Summary of Contents for GRIZZLY 550 FI YFM5FGY









































































































































































Search results

Summary of Contents for GRIZZLY 550 FI YFM5FGY

Reviews:

Related manuals for GRIZZLY 550 FI YFM5FGY

Brands by name

Popular brands

Yamaha GRIZZLY 550 FI YFM5FGY, Owner'S Manual

Search results

Summary of Contents for GRIZZLY 550 FI YFM5FGY

Reviews:

Related manuals for GRIZZLY 550 FI YFM5FGY

Brands by name

Popular brands