Yamaha GRIZZLY 550 FI YFM5FGY Owner'S Manual Download

Page: 107 / 168

8-21

2. Check the spark plug for electrode erosion

and excessive carbon or other deposits, and
replace it if necessary.

To install the spark plug

1. Measure the spark plug gap with a wire thick-

ness gauge and, if necessary, adjust the gap
to specification.

2. Clean the surface of the spark plug gasket

and its mating surface, and then wipe off any
grime from the spark plug threads.

3. Install the spark plug with the spark plug

wrench, and then tighten it to the specified
torque.

Specified spark plug:

NGK/LMAR6A-9

Spark plug gap:

0.8–0.9 mm (0.031–0.035 in)

1. Spark plug gap

Tightening torque:

Spark plug:

12.5 Nm (1.25 m·kgf, 9.0 ft·lbf)

U28P60E0.book Page 21 Thursday, April 17, 2008 8:51 AM

Summary of Contents for GRIZZLY 550 FI YFM5FGY









































































































































































Search results

Summary of Contents for GRIZZLY 550 FI YFM5FGY

Reviews:

Related manuals for GRIZZLY 550 FI YFM5FGY

Brands by name

Popular brands

Yamaha GRIZZLY 550 FI YFM5FGY, Owner'S Manual

Search results

Summary of Contents for GRIZZLY 550 FI YFM5FGY

Reviews:

Related manuals for GRIZZLY 550 FI YFM5FGY

Brands by name

Popular brands