Yamaha GRIZZLY 450 YFM45FGY Owner'S Manual Download Page 26

Page: 26 / 164

4-3

●

Start the engine after making sure that the
warning light is out. Continuous use while
the warning light is on may cause damage to
the engine.

EBU17961

On-Command four-wheel-drive/differential
gear lock indicator “

”/“

”

The On-Command four-wheel-drive indicator “

”

comes on when the On-Command four-wheel-
drive switch is set to the “4WD” position.
The On-Command differential gear lock
indicator “

” in the On-Command four-wheel-

drive indicator also comes on when the On-Com-
mand differential gear lock switch is set to the
“LOCK” position.

TIP

●

Due to the synchronizing mechanism in the dif-
ferential gear case, the four-wheel-drive indica-
tor may not come on until the ATV starts moving.

●

When the On-Command differential gear lock
switch is set to “LOCK”, the indicator “

” will

flash until the differential gear is locked.

EBU17970

Park indicator light “

”

This indicator light comes on when the transmis-
sion is in the park position.

EBU17980

High-range indicator light “

”

This indicator light comes on when the transmis-
sion is in the high-range position.

EBU17990

Low-range indicator light “

”

This indicator light comes on when the transmis-
sion is in the low-range position.

EBU18001

On-Command differential gear lock indicator
light “DIFF. LOCK”

This indicator light and the On-Command differen-
tial gear lock indicator in the display come on when
the On-Command differential gear lock switch is
set to the “LOCK” position.

TIP

When the switch is set to “LOCK”, the On-Com-
mand differential gear lock indicator light will flash
until the differential gear is locked.

U37S60E0.book Page 3 Thursday, June 5, 2008 6:51 PM

Summary of Contents for GRIZZLY 450 YFM45FGY





































































































































































Search results

Summary of Contents for GRIZZLY 450 YFM45FGY

Reviews:

Related manuals for GRIZZLY 450 YFM45FGY

Brands by name

Popular brands

Yamaha GRIZZLY 450 YFM45FGY, Owner'S Manual

Search results

Summary of Contents for GRIZZLY 450 YFM45FGY

Reviews:

Related manuals for GRIZZLY 450 YFM45FGY

Brands by name

Popular brands