Yamaha GRIZZLY 350 2016 Installation Manual Download

Page: 49 / 140

5-6

Aftermarket tires and rims

The tires and rims that came with your ATV were
designed to match the performance capabilities
and to provide the best combination of handling,
braking, and comfort. Other tires, rims, sizes, and
combinations may not be appropriate.

EBU19841

Chassis fasteners

Make sure that all nuts, bolts and screws are
properly tightened.

EBU19851

Instruments, lights and switches

Check that all instruments, lights and switches are
working properly. Correct if necessary.

Front:

Manufacturer/model:

CHENG SHIN/C828 (AUS, NZL)
MAXXIS/MU13 (EUR, FRA, GBR)

Size:

AT25 x 8-12

Type:

Tubeless

Rear:

Manufacturer/model:

CHENG SHIN/C828 (AUS, NZL)
MAXXIS/MU14 (EUR, FRA, GBR)

Size:

AT25 x 10-12

Type:

Tubeless

UB1463E0.book Page 6 Thursday, August 4, 2016 2:12 PM

Summary of Contents for GRIZZLY 350 2016













































































































































Search results

Summary of Contents for GRIZZLY 350 2016

Reviews:

Related manuals for GRIZZLY 350 2016

Brands by name

Popular brands

Yamaha GRIZZLY 350 2016, Installation Manual

Search results

Summary of Contents for GRIZZLY 350 2016

Reviews:

Related manuals for GRIZZLY 350 2016

Brands by name

Popular brands