8-42
8
3. If the electrolyte is at or below the minimum
level mark, add distilled water to raise it to the
maximum level mark.
NOTICE:
Use only dis-
tilled water, as tap water contains minerals
that are harmful to the battery.
[ECB00591]
4. Check and, if necessary, tighten the battery
lead connections and correct the breather
hose routing.
To remove the battery
1. Disconnect the negative lead first and then the
positive lead.
NOTICE:
When removing the
battery, the main switch must be off, and
the negative lead must be disconnected
before the positive lead.
[ECB01001]
2. Remove the battery.
To store the battery
●
If the ATV will not be used for more than one
month, remove the battery, fully charge it, and
then place it in a cool, dry place.
1. Battery
2. Battery breather hose
3. Guide
1
2
3
1. Battery
2. Negative battery lead (black)
3. Positive battery lead (red)
1
2
3
U1PY60E0.book Page 42 Friday, March 11, 2011 9:30 AM
