manualshive.com logo in svg

Yamaha GRIZZLY 125 YFM125GB, Owner'S Manual, Page: 104 / 132

Share
Download
Yamaha GRIZZLY 125 YFM125GB Owner'S Manual Download Page 104

8-35

8

To adjust the drive chain slack

1. Place the ATV on a level surface.
2. Loosen the hub stopper bolt locknut and then

the hub stopper bolt.

3. Loosen the axle holding bolts.

4. Loosen the drive chain slack adjusting bolt

locknut. To tighten the drive chain, turn the ad-
justing bolt in direction (a). To loosen the drive
chain, turn the adjusting bolt in direction (b),
and then push the wheels forward. 

NOTICE:

Improper drive chain slack will overload

the engine as well as other vital parts of
the ATV and can lead to drive chain slip-
page or breakage. To prevent this from oc-
curring, keep the drive chain slack within
the specified limits.

 [ECB00542]

5. Tighten the drive chain slack adjusting bolt

locknut and the axle holding bolts to the spec-
ified torques.

1. Hub stopper bolt

2. Hub stopper bolt locknut

3. Axle holding bolt (lower)
4. Axle holding bolt (upper)

1

2

3

4

1. Locknut
2. Drive chain slack adjusting bolt

1

2

(a)

(b)

U1PY60E0.book  Page 35  Friday, March 11, 2011  9:30 AM

Summary of Contents for GRIZZLY 125 YFM125GB





































































































































Reviews:

No comments