Yamaha Grand filano LTF125-I Owner'S Manual Download Page 52

Page: 52 / 110

Instrument an

control functions

6-18

To release a helmet from a helmet
hol

Open the seat, remove the helmet from
the helmet holder, and then close the
seat.

EAU57081

Stora

e compartments

Front stora

e compartment

The front storage compartment is lo-
cated at the front of the vehicle. Use
this compartment for small items.

WARNING

EWA17250

Do not excee

the loa

limit of 1

(2.2 l

) for the front stora

compartment.

Do not place anythin

in the

front stora

e compartment that

will interfere with your operatin

the vehicle.

Rear stora

e compartment

The rear storage compartment is locat-
ed under the seat. Use this compart-
ment for large items. (See page 6-16.)

WARNING

EWAT1052

Do not excee

the loa

limit of 8

(17.6 l

) for the rear stora

compartment.

Do not excee

the maximum

loa

of 160 k

(353 l

) for the ve-

hicle.

NOTICE

ECA21150

Keep the followin

points in min

when usin

the stora

e compart-

ment.

1. Front storage compartment

1. Rear storage compartment

UB8BE0E0.book Page 18 Wednesday, April 11, 2018 9:35 AM

Summary of Contents for Grand filano LTF125-I















































































































Search results

Summary of Contents for Grand filano LTF125-I

Reviews:

Related manuals for Grand filano LTF125-I

Brands by name

Popular brands

Yamaha Grand filano LTF125-I, Owner'S Manual

Search results

Summary of Contents for Grand filano LTF125-I

Reviews:

Related manuals for Grand filano LTF125-I

Brands by name

Popular brands