Smart key system (LTF125-A)
4-8
4
EAU76500
ON (on)
All electrical circuits are supplied with
the power, and the engine can be start-
ed.
To turn the vehicle power on
1. Turn the smart key on and bring it
within operating range.
2. Push the main switch knob and
the smart key indicator light will
come on for approximately 4 sec-
onds.
3. While the smart key system indi-
cator light is on, turn the main
switch to “ON”. All of the turn sig-
nal lights flash twice and the vehi-
cle power turns on.
TIP
z
If the vehicle battery voltage is
low, the turn signal lights will not
flash.
z
See “Emergency mode” on page
9-35 for information on turning the
vehicle power on without the
smart key.
EAU76510
OFF (off)
All electrical systems are off.
To turn the vehicle power off
1. With the smart key turned on and
within operating range, turn the
main switch to “OFF”.
2. The turn signal lights flash once
and the vehicle power turns off.
TIP
When the main switch is turned to
“OFF” but the smart key cannot be
confirmed (the smart key is either out-
side operation range or has been
turned off), the beeper will sound for 3
seconds and the smart key system in-
dicator light will flash for 30 seconds.
z
During this 30 seconds, the main
switch can be freely operated.
z
After 30 seconds, the vehicle
power will turn off automatically.
z
To turn the vehicle power off im-
mediately, push the main switch
knob four times within 2 seconds.
EAUV0800
OPEN (open)
The fuel tank cap lid and seat can be
opened.
1. With the smart key on and within
operating range, push the main
switch knob.
1. Push.
2. Turn.
1
2
1. Turn.
1
UB8BE0E0.book Page 8 Wednesday, April 11, 2018 9:35 AM
