Yamaha GP1300R WaveRunner 2006, Owner'S/Operator'S Manual

Page: 36 / 126

2-8
E
EJU18610
Start switch
Push the start switch
1
(green button) to
start the engine.
NOTE:
@
The engine will not start when the clip is
removed from the engine shut-off switch or if
the throttle lever is squeezed.
@
EJU10201
Cooling water pilot outlet
This watercraft is equipped with cooling
water pilot outlets.
When the engine is running, cooling
water is circulated in the engine, and then it
is discharged from the pilot outlets.
To check for proper operation of the cool-
ing system, check that water is being dis-
charged from the pilot outlets. If water is not
being discharged from the outlets, cooling
water may not be circulating in the engine.
When this occurs, stop the engine and
check for the cause. (See pages 2-12 and
5-4 for further instructions.)
NOTE:
@
If the cooling water passages are dry, it will
take about 20 seconds for the water to reach
the outlet after the engine is started.
@
E_F1G10.book Page 8 Tuesday, July 12, 2005 10:26 AM