Yamaha GP1300R WaveRunner 2005, Owner'S/Operator'S Manual

Page: 64 / 124

3-15
E
EJU18352
Switches
CAUTION:
@
Do not run the engine of the watercraft
for more than 15 seconds on land with-
out supplying water, otherwise the
engine may overheat.
@
Check the start switch, the engine stop
switch, and the engine shut-off switch for
proper operation.
Push the start switch
1
to start the
engine. As soon as the engine starts run-
ning, push the engine stop switch
2
to ver-
ify that the engine stops immediately.
Restart the engine, and then pull the engine
shut-off cord
5
to remove the clip
4
from
the engine shut-off switch
3
to verify that
the engine stops immediately. (See pages
2-7 to 2-8 for information on proper opera-
tion of the start switch, the engine stop
switch, and the engine shut-off switch.)
EJU10610
Cooling water pilot outlet
Check that water comes out from the out-
lets while the engine is running and the
watercraft is in the water.
EJU10620
Multifunction information center
Check the operation of the multifunction
information center. (See pages 2-15 to 2-19
for multifunction information center.)
UF1G12.book Page 15 Tuesday, October 5, 2004 1:41 PM