manualshive.com logo in svg

Yamaha GP1300R WaveRunner 2005, Owner'S/Operator'S Manual

The Yamaha GP1300R WaveRunner 2005 is a high-performance watercraft designed for adventure seekers. Unlock the full potential of this powerful machine with the Owner's/Operator's Manual, available for free download on manualshive.com. Get all the essential information and operating instructions to make the most out of your thrilling WaveRunner experience.

Share
Download
background image

6-4

E

EJU11250 

Index 

2-stroke engine oil................................... 3-3

A

Adjusting the fuel injection system ........ 4-19
Adjusting the Yamaha Adjustable 
Sponson (YAS) ..................................... 4-21
Approval label of Emission control 
certificate................................................. 1-3

B

Battery............................................3-10, 4-5
Beaching the watercraft ........................ 3-32
Bilge ........................................................ 3-9
Bleeding the oil injection pump ............. 4-20
Boarding alone ...................................... 3-25
Boarding and starting in deep water ..... 3-25
Boarding with a passenger.................... 3-26
Bow down.............................................. 2-11
Bow up .................................................. 2-11

C

Capsized watercraft .............................. 3-27
Check engine warning indicator ............ 2-18
Checking the trolling speed................... 4-19
Cleaning and adjusting the 
spark plugs............................................ 4-13
Cleaning the jet intake and impeller ........ 5-4
Cleaning the watercraft ........................... 4-6
Connecting the jumper cables................. 5-6
Cooling water pilot outlet................2-8, 3-15
Crossing ................................................ 1-17
Cruising limitations ................................ 1-10

D

Docking the watercraft .......................... 3-32

E

Emergency procedures ........................... 5-4
Emission control information ................... 1-3
Engine break-in ..................................... 3-16
Engine compartment ............................... 3-7
Engine overheat warning indicator........ 2-19
Engine overheat warning system .......... 2-12
Engine serial number .............................. 1-2
Engine shut-off cord (lanyard)............... 3-14

Engine shut-off switch ............................. 2-7
Engine stop switch .................................. 2-7
Enjoy your watercraft responsibly ......... 1-21
Exhaust temperature warning 
indicator................................................. 2-19
Exhaust temperature warning 
system ................................................... 2-13

F

Filling the fuel tank .................................. 3-4
Filling the oil tank .................................... 3-5
Fire extinguisher.................................... 3-11
Fishing vessel right-of-way.................... 1-18
Flushing the cooling system .................... 4-1
Front storage compartment ................... 2-20
Fuel and oil.............................................. 3-1
Fuel and oil systems ............................... 3-8
Fuel meter ............................................. 2-16
Fuel system ............................................. 4-3
Fuel tank ............................................... 4-10
Fuel tank filler cap ................................... 2-6
Fuel warning indicator ........................... 2-17

G

Gasohol ................................................... 3-3
Gasoline .................................................. 3-1
Getting to know your watercraft ............ 3-21
Give-way vessel .................................... 1-16
Glove compartment ............................... 2-21

H

Handgrip................................................ 2-11
Hazard information ................................ 1-14
Hood........................................................ 2-6
Hour meter/Voltmeter ............................ 2-17
Hull and deck .......................................... 3-7
Hull Identification Number (HIN).............. 1-2

I

Identification numbers ............................. 1-1
Important labels....................................... 1-5
Inspecting and adjusting the 
throttle cable.......................................... 4-12
Inspecting the battery ............................ 4-17
Inspecting the fuel system..................... 4-10
Inspecting the jet thrust nozzle angle .... 4-12
Inspecting the oil injection system......... 4-11

UF1G12.book  Page 4  Tuesday, October 5, 2004  1:41 PM

Summary of Contents for GP1300R WaveRunner 2005





























































































































Reviews:

No comments

Related manuals for GP1300R WaveRunner 2005

J/Boats J/111 Owner'S Manual preview
J/111
Brand: J/Boats Pages: 65
PURSUIT 2550 Console Cabin Owner'S Manual preview
2550 Console Cabin
Brand: PURSUIT Pages: 29
Yamaha WaveRunner GP1800R HO Owner'S/Operator'S Manual preview
WaveRunner GP1800R HO
Brand: Yamaha Pages: 108
Yamaha 190 FSH Sport 2017 Owner'S/Operator'S Manual preview
190 FSH Sport 2017
Brand: Yamaha Pages: 140
komodo KDKX1INFKYA User Manual preview
KDKX1INFKYA
Brand: komodo Pages: 12
Sea-doo GS 2002 Operator'S Manual preview
GS 2002
Brand: Sea-doo Pages: 132
Grand Banks Latis Operation Manual preview
Latis
Brand: Grand Banks Pages: 51
Scarab jet boat Owenrs Manual preview
jet boat
Brand: Scarab Pages: 156
Walker Bay RID 275H Assembly Instructions preview
RID 275H
Brand: Walker Bay Pages: 4
Sailfish 208 CC Owner'S Manual preview
208 CC
Brand: Sailfish Pages: 26
Jeanneau MERRY FISHER 725 HB Owner'S Manual preview
MERRY FISHER 725 HB
Brand: Jeanneau Pages: 102
Jeanneau PRESTIGE 30 Owner'S Manual preview
PRESTIGE 30
Brand: Jeanneau Pages: 92
SEVEN BASS DESIGN Hard Fabric Line Assembly Instructions And User'S Manual preview
Hard Fabric Line
Brand: SEVEN BASS DESIGN Pages: 4
Baja 202 Islander Owner'S Manual preview
202 Islander
Brand: Baja Pages: 83
Sea Ray 260 Sundeck Specific Information Manual preview
260 Sundeck
Brand: Sea Ray Pages: 28
Sea Ray 290 Select FX Owner'S Manual Supplement preview
290 Select FX
Brand: Sea Ray Pages: 64
Jeanneau SUN ODYSSEY 44 DS Owner'S Manual preview
SUN ODYSSEY 44 DS
Brand: Jeanneau Pages: 154
NRS Freestone Drifter Owner'S Manual preview
Freestone Drifter
Brand: NRS Pages: 8

Brands by name

Popular brands

Load more brands