1 2
GUI
TA
R
MIX
SYN
TH
UP
DO
WN
VO
L
Setup
Setup
Once installation is complete, you’re ready
to connect and check out your MIDI guitar
system (assuming you also have a G50 Guitar
MIDI Converter and appropriate tone-genera-
tor/sound hardware).
1. Connect the direct guitar cable.
Connect the 1/4" mono phone plug end of the
direct guitar cable (supplied with the G1D) to the
guitar’s output jack, and the mono mini-plug end
of the cable to the G1D direct guitar input jack.
2. Connect the G1D to the G50.
After making sure that the G50 Guitar MIDI
Converter power is OFF, plug one end of the multi-
pin cable supplied with the G50 into the G1D
multi-pin connector, and the other end into the
DIVIDED INPUT connector on the G50. The
release button on the multi-pin plug should face
outward.
■
NOTES
• Always connect the direct guitar cable, even if you
don’t intend to use the direct guitar sound. The
direct guitar cable is essential for proper grounding,
to minimize noise and prevent electric shock.
■
NOTES
• For extra security and damage prevention it is a good
idea to pass the cable between the strap and guitar
body near the body strap pin.
GUITAR
MIX
SYNTH
UP
DOWN
VOL
DIVIDED
MONO SYNTH
Multi-pin cable
Direct guitar cable
Multi-pin cable
Strap
