–7–
CABLE ROUTING
SPEC
1
Starter cable
2
Clutch cable
3
Left handlebar switch lead
4
Min switch lead
5
EXUP motor
6
Starting circuit cut-off relay
7
Starter motor lead
8
Radiator fan motor relay
9
Sidestand switch lead
10
Air filter case drain hose
11
Oil level switch lead
12
A.C. magneto lead
13
Coolant pipe
14
Carburetor heater hose
15
Throttle cable 1
16
Throttle cable 2
17
Spark plug leads
18
EXUP cable
A Fasten the main switch lead and left handlebar
switch lead to the frame with a plastic band.
B Fasten the coolant hose and carburetor heater
hose with a plastic band.
Clamp it at 50 mm from the top end of the cylinder
head cover.
C Route the spark plug lead #1 outside of the starter
cable and carburetor heater hose, and under the
clutch cable and rectifier / regulator lead.
D Fasten the clutch cable with a plastic clamp to the
frame.
E Fasten the wire harness with a plastic clamp to the
frame.
