Yamaha FZ6-SA Owner'S Manual Download Page 55 | Manualshive

Page: 55 / 92

Yamaha FZ6-SA Owner'S Manual Download Page 55

PERIODIC MAINTENANCE AND MINOR REPAIR

6-14

6

●

If water has been used instead
of coolant, replace it with cool-
ant as soon as possible, other-
wise the engine may not be
sufficiently cooled and the cool-
ing system will not be protected
against frost and corrosion.

●

If water has been added to the
coolant, have a Yamaha dealer
check the antifreeze content of
the coolant as soon as possible,
otherwise the effectiveness of
the coolant will be reduced.

13. Install the coolant reservoir cap.
14. Install the radiator cap, radiator

cap retainer and radiator cap re-
taining bolt.

15. Start the engine, let it idle for sev-

eral minutes, and then turn it off.

16. Remove the radiator cap to check

the coolant level in the radiator. If
necessary, add sufficient coolant
until it reaches the top of the radia-
tor, and then install the radiator
cap, radiator cap retainer and radi-
ator cap retaining bolt.

17. Check the coolant level in the res-

ervoir. If necessary, remove the
coolant reservoir cap, add coolant
to the maximum level mark, and
then install the cap.

18. Start the engine, and then check

the vehicle for coolant leakage. If
coolant is leaking, have a Yamaha
dealer check the cooling system.

19. Install the panel.

1. Radiator cap retaining bolt
2. Radiator cap

3. Radiator cap retainer

U4P5E0E0.book Page 14 Wednesday, December 14, 2005 11:15 AM

«
...
53
54
55
56
57
...
»

Summary of Contents for FZ6-SA





























































































Reviews:

No comments