manualshive.com logo in svg

Yamaha FZ6-SA, Owner'S Manual, Page: 29 / 92

Share
Download
Yamaha FZ6-SA Owner'S Manual Download Page 29

INSTRUMENT AND CONTROL FUNCTIONS

3-15

3

or premium unleaded fuel. Use of un-
leaded fuel will extend spark plug life
and reduce maintenance costs.

EAU13410

Fuel tank breather hose 

Before operating the motorcycle:

●

Check the fuel tank breather hose
connection.

●

Check the fuel tank breather hose
for cracks or damage, and replace
it if damaged.

●

Make sure that the end of the fuel
tank breather hose is not blocked,
and clean it if necessary.

EAU13431

Catalytic converter 

This model is equipped with a catalytic
converter in the exhaust system.

WARNING

EWA10860

The exhaust system is hot after op-
eration. Make sure that the exhaust
system has cooled down before do-
ing any maintenance work.

CAUTION:

ECA10700

The following precautions must be
observed to prevent a fire hazard or
other damages.

●

Use only unleaded gasoline.
The use of leaded gasoline will
cause unrepairable damage to
the catalytic converter.

●

Never park the vehicle near pos-
sible fire hazards such as grass
or other materials that easily
burn.

●

Do not allow the engine to idle
too long.

1. Fuel tank breather hose

2. Original position (paint mark)

U4P5E0E0.book  Page 15  Wednesday, December 14, 2005  11:15 AM

Summary of Contents for FZ6-SA





























































































Reviews:

No comments