NOTICE
A. CHECKING AND CHARGING THE BATTERY
1. Charging:
The battery must be charged properly before using for the
first time. This initial charge will prolong the life of the
battery.
(a) Upper level line
(b) Lower level line
a. Remove all filler caps from the battery and remove the
breather hose cap (1).
TIP:
Place the battery on a level place.
b. Cool the electrolyte .
c. Pour electrolyte into each cell little by little up to the
upper level line (a), and leave it for a while. When the
battery fluid permeates the plates and separators, the
fluid level begins to lower. Add electrolyte and bring back
to upper level line (a).
TIP:
Fill the battery with electrolyte (diluted sulfuric acid).
Never try to add battery electrolyte to a battery that is
installed on a motorcycle. Even a skilled mechanic
will spill enough acid to damage metal parts. Always
remove the battery before filling with electrolyte and
during charging. Always completely clean the
exterior of the battery before installing.
Battery electrolyte is dangerous; it contain sulfuric
acid and therefore is poisonous and highly caustic.
Always follow these preventive measures
:
1. Avoid bodily contact with electrolyte as it can
cause severe burns or permanent eye
injury.
2. Wear protective eye gear when handling or
working near batteries.
Antidote (EXTERNAL)
:
• SKIN-Flush with water.
Antidote (INTERNAL)
:
Drink large quantities of water or milk follow with
milk of magnesia, beaten egg, orvegetable oil. Get
immediate medical
Attention.
• EYES-Flush with water for 15 minutes and get
immediate medical attention.
•
1
a
b
WARNING
26
