8
SETUP AND PREDILIVERY CHECK LIST
TIP:
Check the following items again after setup and
predelivery service have been completed.
A
:
INSTALLATION OF THE PARTS INCLUDED IN THE CRATE
Front wheel
Rearview Mirrors
Front fender
Seat
Handlebar
B
:
TIGHTENING TORQUE OF EACH PART
Flange bolt (front fender)
Front wheel axle nut
Flange bolt (Handlebar holder)
Front fender screw
Grip eng cap bolt
Master cylinder holding cap bolt
Right / Left handle switch screw
07 Nm (0.7 m · kg, 05 ft · lb)
60 Nm (6.0 m · kg, 43 ft · lb)
26 Nm (2.6 m · kg, 19 ft · lb)
06 Nm (0.6 m · kg, 04 ft · lb)
04 Nm (0.4 m · kg, 03 ft · lb)
10 Nm (1.0 m · kg, 07 ft · lb)
10 Nm (1.0 m · kg, 07 ft · lb)
C
:
ROUTING OF WIRE, CABLES, ETC.
Clutch switch lead
Right handlebar switch lead
Clutch cable
Throttle cable
Left handlebar switch lead
Front brake light switch lead
D
:
ADJUSTMENTS
Adjusting the clutch cable free play
Checking the engine oil level
Adjusting the engine idling speed
Adjusting the throttle cable free play
Adjusting the rear brake light switch
Adjusting the rear brake
Measuring the tire pressure
Adjusting the drive chain slack
Adjusting the headlight beam
E
:
FUNCTION AND PERFORMANCE
Check the function of the headlight, meter light and
taillight
Check the function of the brake light
Check the function of the turn signals and indicator
lights
Check the tone quality of the horn
Check the function of the
indicator on the speedometer
Check the feel of the brakes
Check engine for irregular noise
(Yes/No)
Check for exhaust leak (Yes/No)
F
:
ACCESSORIES, ETC. FOR DELIVERY
Owner
’s manual
Owner’s tool kit
