manualshive.com logo in svg

Yamaha FX Nytro FX10A, Owner'S Manual

Share
Download
Yamaha FX Nytro FX10A Owner'S Manual Download Page 22

Control functions

16

2.

While lightly pushing the brake lever in di-
rection (a), turn the adjusting bolt to set
the brake lever to the desired position.

3.

Tighten the locknut securely after adjust-
ing the brake lever position.

ESU10581

Parking brake lever 

When parking the snowmobile or starting the
engine, apply the parking brake by moving the
parking brake lever to the left.

To release the parking brake, move the park-
ing brake lever to the right.

ESU13032

Shift lever 

The shift lever is used to put the snowmobile
into forward or reverse. Before shifting, wait
for the snowmobile to come to a complete
stop with the engine idling. Pull the shift lever
out, slide it to “FWD” or to “REV” until it stops,
and then push it back in.

1. Locknut
2. Adjusting bolt

1. Parking brake lever

1. Shift lever

1. Pull out.
2. Slide to “FWD” (forward).

3. Push in.

1

U8HK12E0.book  Page 16  Monday, May 17, 2010  11:42 AM

Summary of Contents for FX Nytro FX10A







































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands