Control functions
10
TIP
If the T.O.R.S. is activated, the warning light
and engine trouble warning indicator will
flash, and the two-digit code “84” will flash in
the meter display. If this occurs, have a
Yamaha dealer check the system as soon as
possible.
ESU12725
Multi-function meter unit
The multi-function meter unit is equipped with
the following:
●
a digital speedometer
●
an odometer
●
a tripmeter (which shows the distance trav-
eled since it was last set to zero)
●
an engine speed meter (which shows the
engine speed; not for use while riding)
●
warning indicators (which show engine
trouble, coolant temperature, fuel level, and
oil level warnings)
●
indicator lights (which show high beam and
low coolant temperature conditions)
●
a warning light (which shows warnings to-
gether with the warning indicators)
●
a fuel meter (which shows the fuel remain-
ing in the fuel tank)
●
a grip/thumb warmer level indicator (which
shows the grip warmer or the thumb warm-
er level)
When the key is turned to the on position, the
warning light, the low coolant temperature in-
dicator light, and all segments of the meter
display come on and go off.
The grip warmer level is initially displayed for
5 seconds, then the display switches to the
fuel meter.
Odometer, tripmeter, and engine
speed meter modes
Pushing the “SELECT” button switches the
display between the odometer mode “ODO”,
tripmeter mode “TRIP”, and engine speed
meter mode “r/min” in the following order:
ODO
→
TRIP
→
r/min
→
ODO
1. Warning light “
”
2. Engine trouble warning indicator “
”
3. Two-digit code “84”
1. Meter display
2. Warning indicators
3. High beam indicator light “
”
4. Low coolant temperature indicator
light “
”
5. Warning light “
”
6. “RESET” button
7. “SELECT” button
1. Odometer/tripmeter/engine speed meter
5 4 3
1
7
6
2
1
U8HK12E0.book Page 10 Monday, May 17, 2010 11:42 AM
