Instrument operation
40
The large outer numbers on the meter show
the engine speed
×
100 rpm (r/min).
The “RPM” indicator light comes on when the
analog tachometer is selected.
To switch to the tachometer from the speed-
ometer:
Push the “SPEED/RPM” button for at least 1
second after the multifunction information
center is activated. When the meter switches
to the analog tachometer function, the
“RPM” indicator light comes on.
Analog speedometer
The analog speedometer shows the water-
craft speed against water.
The small inner numbers on the meter show
the watercraft speed in kilometers per hour
“km/h” and the large outer numbers show the
speed in miles per hour “mph”.
The “SPEED” indicator light comes on when
the analog speedometer is selected.
To switch to the speedometer from the ta-
chometer:
Push the “SPEED/RPM” button for at least 1
second after the multifunction information
center is activated. When the meter switches
to the analog speedometer function, the
“SPEED” indicator light comes on if “km/h”
are selected as the display units. The
“SPEED” indicator light blinks three times,
then comes on, if “mph” are selected as the
display units. (See page 40 for information on
switching the digital speedometer display
units.)
EJU35027
Information display
The information display shows watercraft op-
erating conditions.
EJU42361
Digital speedometer
The digital speedometer shows the water-
craft speed against water.
1
“SPEED/RPM” button
2
“RPM” indicator light
2
1
1
“SPEED/RPM” button
2
“SPEED” indicator light
1
Fuel level meter
2
Fuel indicator
3
Hour meter/voltmeter
4
Digital speedometer
5
Engine overheat warning indicator
6
Check engine warning indicator
7
Oil pressure warning indicator
2
1
1
2
3
5
6
7
4
UF2T77E0.book Page 40 Monday, July 11, 2016 9:31 AM