Instruments and indicators
54
Get back to the port soon if the low battery
voltage-alert device has activated. For
charging the battery, consult your Yamaha
dealer.
EMU41710
Engine trouble alert
The pop-up window will appear if the engine
malfunctions while cruising. Press the “
”
(set) button to change to normal display, and
the engine trouble-alert indicator will start to
blink.
Return to port and consult a Yamaha dealer
immediately.
EMU40791
Command Link meter
There are 6 types of Command Link meters:
tachometer unit (square and round types),
speedometer unit (square type), speed &
fuel meter unit (square and round types), and
fuel management meter (square type). The
indicator system is slightly different between
the round and square types. Check the mod-
el and type of your unit carefully. This manu-
al describes mainly the alert indicators. For
more details on setting meters or changing
indicator systems, see the operation manual
for the meters.
EMU41163
Command Link tachometer
The tachometer shows the engine speed
and has functions of trim meter, adjusting
trolling speed, cooling water/engine temper-
ature display, battery voltage display, total
hour/trip hour display, oil pressure display,
water detection alert, engine trouble alert,
and periodic maintenance notification. If the
cooling water pressure sensor is installed,
the unit can also show the cooling water
pressure display. However, even if the cool-
ing water pressure sensor is not installed,
the cooling water pressure display can be
shown by connecting an optional sensor to
the unit. For the optional sensor, consult your
Yamaha dealer. The tachometer unit is avail-
able in round and square types. Check your
tachometer unit type.
ZMU07252
ZMU07253
ZMU07254
6AW-9-18.book 54 ページ ２０１０年３月２２日 月曜日 午前１１時３５分
©
2019 Yamaha Motor Corporation, U.S.A.
