Yamaha FJR13AA Owner'S Manual Download Page 98

Page: 98 / 114

SPECIFICATIONS

9-1

Dimensions:

Overall length:

2230 mm (87.8 in)

Overall width:

750 mm (29.5 in)

Overall height:

1450 mm (57.1 in)

Seat height:

805 mm (31.7 in)

Wheelbase:

1545 mm (60.8 in)

Ground clearance:

130 mm (5.12 in)

Minimum turning radius:

3100 mm (122.0 in)

Weight:

Curb weight:

FJR13AA 291 kg (642 lb)
FJR13AAC 292 kg (644 lb)

Engine:

Engine type:

Liquid cooled 4-stroke, DOHC

Cylinder arrangement:

Inline 4-cylinder

Displacement:

1298 cm³

Bore

stroke:

79.0

66.2 mm (3.11

2.61 in)

Compression ratio:

10.80 : 1

Starting system:

Electric starter

Lubrication system:

Wet sump

Engine oil:

Recommended brand:

YAMALUBE

Type:

SAE 20W-40 or 20W-50

Recommended engine oil grade:

API service SG type or higher, JASO
standard MA

Engine oil quantity:

Without oil filter cartridge replacement:

3.80 L (4.02 US qt, 3.34 Imp.qt)

With oil filter cartridge replacement:

4.00 L (4.23 US qt, 3.52 Imp.qt)

Final gear oil:

Type:

Yamaha genuine shaft drive gear oil SAE
80 API GL-5

Quantity:

0.20 L (0.21 US qt, 0.18 Imp.qt)

Cooling system:

Coolant reservoir capacity (up to the
maximum level mark):

0.25 L (0.26 US qt, 0.22 Imp.qt)

Radiator capacity (including all routes):

2.60 L (2.75 US qt, 2.29 Imp.qt)

Air filter:

Air filter element:

Dry element

Fuel:

Recommended fuel:

Unleaded gasoline only

Fuel tank capacity:

25.0 L (6.61 US gal, 5.50 Imp.gal)

Fuel reserve amount:

5.5 L (1.45 US gal, 1.21 Imp.gal)

Fuel injection:

Throttle body:

ID mark:

FJR13AA 3P6D 20
FJR13AAC 3P6H 30

Spark plug(s):

Manufacturer/model:

NGK/CR8E

Manufacturer/model:

DENSO/U24ESR-N

Spark plug gap:

0.7–0.8 mm (0.028–0.031 in)

Clutch:

Clutch type:

Wet, multiple-disc

Transmission:

Primary reduction ratio:

1.563 (75/48)

Final drive:

Shaft

Secondary reduction ratio:

2.698 (35/37 x 21/27 x 33/9)

110 130 ˚F

-20 -10

50 ˚C

SAE 20W-50

SAE 20W-40

U1CY11E0.book Page 1 Wednesday, December 22, 2010 3:32 PM

Summary of Contents for FJR13AA



















































































































Search results

Summary of Contents for FJR13AA

Reviews:

Related manuals for FJR13AA

Brands by name

Popular brands

Yamaha FJR13AA, Owner'S Manual

Search results

Summary of Contents for FJR13AA

Reviews:

Related manuals for FJR13AA

Brands by name

Popular brands