INSTRUMENT AND CONTROL FUNCTIONS
4-4
4
EAU12348
Handlebar switches
Left
Right
EAU12400
Dimmer switch “
/
”
Set this switch to “
” for the high
beam and to “
” for the low beam.
EAU12460
Turn signal switch “
/
”
To signal a right-hand turn, push this
switch to “
”. To signal a left-hand
turn, push this switch to “
”. When re-
leased, the switch returns to the center
position. To cancel the turn signal
lights, push the switch in after it has re-
turned to the center position.
EAU12500
Horn switch “
”
Press this switch to sound the horn.
EAUM1132
Start switch “ ”
Push this switch while applying the
front or rear brake to crank the engine
with the starter. See page 6-1 for start-
ing instructions prior to starting the en-
gine.
EAUU1020
Hazard switch “
/ ”
Set this switch to “
” for the hazard
lights (simultaneous flashing of all turn
signal lights).
The hazard lights are used in case of
an emergency or to warn other drivers
when your vehicle is stopped where it
might be a traffic hazard.
ECA10061
NOTICE
Do not use the hazard lights for an
extended length of time with the en-
gine not running, otherwise the bat-
tery may discharge.
Set this switch to “ ” to turn off the haz-
ard lights.
1. Dimmer switch “
/
”
2. Turn signal switch “
/
”
3. Horn switch “
”
1. Hazard switch “
/
”
2. Start switch “
”
1
2
3
ZAUU0684
1
2
ZAUU0685
52BF8199E0.book Page 4 Friday, December 10, 2010 10:23 AM
