Yamaha Fino 125 Manual Download

Page: 40 / 78

Perio

ic maintenance an

justment

7-4

Wheels (cast)

• Check runout and for damage.



Wheels (spoke)

• Check runout, spoke tightness

and for damage.

• Tighten spokes if necessary.



Tires

• Check tread depth and for dam-

age.

• Replace if necessary.
• Check air pressure.
• Correct if necessary.



Wheel

earin

• Check bearings for looseness or

damage.



Steerin

earin

• Check bearing play and steering

for roughness.



• Lubricate with lithium-soap-

based grease.

Every 12000 km (7500 mi)

Chassis fasteners

• Make sure that all nuts, bolts and

screws are properly tightened.



Front

rake lever

pivot shaft

• Lubricate with silicone grease.



Rear

rake lever

pivot shaft

• Lubricate with lithium-soap-

based grease.



estan

, center-

stan

• Check operation.
• Lubricate with lithium-soap-

based grease.



estan

switch

• Check operation.



NO.

ITEM

CHECK OR MAINTENANCE JOB

ODOMETER READING (whichever comes first)

ANNUAL

CHECK

1000 km

2 months

4000 km

6 months

8000 km

10 months

12000 km

14 months

16000 km

18 months

UBB9E2E0.book Page 4 Thursday, October 22, 2020 3:53 PM

Summary of Contents for Fino 125















































































Search results

Summary of Contents for Fino 125

Reviews:

Related manuals for Fino 125

Brands by name

Popular brands

Yamaha Fino 125, Manual

Search results

Summary of Contents for Fino 125

Reviews:

Related manuals for Fino 125

Brands by name

Popular brands