Yamaha Fino 125 Manual Download

Page: 21 / 78

Instrument an

control functions

4-2

EAUU0353

Main switch/steerin

lock

The main switch/steering lock controls
the ignition and lighting systems, and is
used to lock the steering, and is used
to open the seat also. The various main
switch positions are described below.

TIP

The main switch is equipped with a
keyhole cover.

EAU85000

The ignition system is supplied with
power, and the engine can be started.
The key cannot be removed.

TIP



To prevent battery discharge, do
not leave the key in the on position
without the engine running.



The vehicle lights come on auto-
matically when the engine is start-
ed.

EAU10662

OFF

All electrical systems are off. The key
can be removed.

WARNING

EWA10062

Never turn the key to “OFF” or
“LOCK” while the vehicle is movin

Otherwise the electrical systems will

e switche

off, which may result in

loss of control or an acci

ent.

EAU1068B

LOCK

The steering is locked and all electrical
systems are off. The key can be re-
moved.

To lock the steering

1. Turn the handlebars all the way to

the left.

2. With the key in the “OFF” position,

push the key in and turn it to
“LOCK”.

3. Remove the key.

TIP

If the steering will not lock, try turning
the handlebars back to the right slight-
ly.

HAND

LOCK

OPEN

SHUT

IGNIT

ION

ZAUU1022

SHUT

OFF

IGNITION

OFF (Push/Turn)

LOCK

ZAUU1025

UBB9E2E0.book Page 2 Thursday, October 22, 2020 3:53 PM

Summary of Contents for Fino 125















































































Search results

Summary of Contents for Fino 125

Reviews:

Related manuals for Fino 125

Brands by name

Popular brands

Yamaha Fino 125, Manual

Search results

Summary of Contents for Fino 125

Reviews:

Related manuals for Fino 125

Brands by name

Popular brands