Yamaha Fazer FZ6-SAHG Owner'S Manual Download

Page: 34 / 100

INSTRUMENT AND CONTROL FUNCTIONS

3-20

●

Do not exceed the maximum
load of FZ6-SAHG 185 kg (408
lb)
FZ6-SHG 190 kg (419 lb) for the
vehicle.

EAU36462

Adjusting the shock absorber
assembly

This shock absorber assembly is
equipped with a spring preload adjust-
ing ring.

CAUTION:

ECA10100

Never attempt to turn an adjusting
mechanism beyond the maximum or
minimum settings.

Adjust the spring preload as follows.

1. Remove the seat. (See page

3-18.)

2. To increase the spring preload and

thereby harden the suspension,
turn the adjusting ring in direction
(a). To decrease the spring pre-
load and thereby soften the sus-
pension, turn the adjusting ring in
direction (b).

NOTE:

●

Align the appropriate notch in the
adjusting ring with the position in-
dicator on the shock absorber.

●

Use the special wrench included in
the owner’s tool kit to make the ad-
justment.

1. Spring preload adjusting ring
2. Special wrench

3. Position indicator

Spring preload setting:

Minimum (soft):

Standard:

Maximum (hard):

U4S8E1E0.book Page 20 Monday, July 2, 2007 10:33 AM

Summary of Contents for Fazer FZ6-SAHG





































































































Search results

Summary of Contents for Fazer FZ6-SAHG

Reviews:

Related manuals for Fazer FZ6-SAHG

Brands by name

Popular brands

Yamaha Fazer FZ6-SAHG, Owner'S Manual

Search results

Summary of Contents for Fazer FZ6-SAHG

Reviews:

Related manuals for Fazer FZ6-SAHG

Brands by name

Popular brands