Yamaha FAZER FZ1-SA Owner'S Manual Download

Page: 26 / 96

INSTRUMENT AND CONTROL FUNCTIONS

3-12

LCD and tachometer brightness
control mode

This function allows you to adjust the
brightness of the LCD and the tachom-
eter panel and needle to suit the out-
side lighting conditions.

To set the brightness

1. Turn the key to “OFF”.
2. Push and hold the “SELECT” but-

ton.

3. Turn the key to “ON”, and then re-

lease the “SELECT” button after
five seconds.

4. Push the “RESET” button to select

the desired brightness level.

5. Push the “SELECT” button to con-

firm the selected brightness level.
The display will return to the odom-
eter or tripmeter mode.

EAU12331

Anti-theft alarm (optional)

This model can be equipped with an
optional anti-theft alarm by a Yamaha
dealer. Contact a Yamaha dealer for
more information.

1. Tachometer panel
2. Tachometer needle

3. LCD

4. Brightness level

U5D0E0E0.book Page 12 Wednesday, October 11, 2006 11:04 AM

Summary of Contents for FAZER FZ1-SA

































































































Search results

Summary of Contents for FAZER FZ1-SA

Reviews:

Related manuals for FAZER FZ1-SA

Brands by name

Popular brands

Yamaha FAZER FZ1-SA, Owner'S Manual

Search results

Summary of Contents for FAZER FZ1-SA

Reviews:

Related manuals for FAZER FZ1-SA

Brands by name

Popular brands