Operation
65
EMU48415
PTT TotalTilt™
This outboard motor is equipped with an au-
tomatic PTT tilt function. When this function
is activated, you can tilt the outboard motor
up/down automatically without keeping the
PTT switch pushed.
TIP:
The PTT TotalTilt function is available only
when the engine is stopped.
Activating and deactivating the PTT To-
talTilt function
This function is deactivated by default. You
can activate and deactivate it by yourself.
EWM01544
Make sure that all people are clear of the
outboard motor when tilting the outboard
motor up and down. Body parts can be
crushed between the outboard motor and
the clamp bracket when the outboard mo-
tor is trimmed or tilted.
(1) Make sure that all the battery switches
are turned on before operation.
(2) Fully tilt the outboard motor down.
(3) Remove the clip from the engine shut-off
switch.
(4) Hold the “
” (down) side of the PTT
switch pushed.
(5) Operate the trim zero set while keeping
the “
” (down) side of the PTT switch
pushed.
TIP:
For how to operate the trim zero set, see
the owner’s manual included with the
gauge.
When the PTT TotalTilt function is activat-
ed, the buzzer will sound once.
When the PTT TotalTilt function is deacti-
vated, the buzzer will sound twice.
Automatic tilt-up
EWM01544
Make sure that all people are clear of the
outboard motor when tilting the outboard
motor up and down. Body parts can be
1. Engine shut-off switch
2. Clip
3. Engine shut-off cord (lanyard)
1
2
3
DN
U6KNK0E0.book Page 65 Monday, November 7, 2022 10:23 AM
