Yamaha F225F, Service Manual

Page: 121 / 576

3-30
Rigging recommendation
0
1
2
3
4
5
6
7
8
9
10
A
Rigging recommendation
Extension length recommendation of battery cable
Do not exceed the recommended extension length for the battery cable. Otherwise, the elec-
trical system could be damaged or operate improperly.
To extend the length of battery cables, follow the requirements in the tables for battery capacity,
cable size, and ambient temperature.
The maximum total extension length is the total combined length of the positive and negative battery
cables.
Select an extension battery cable and terminal that meet ABYC requirements or the equivalent.
Select the battery stud that is best-suited to the terminal size.
Solder the cable and terminal connections to prevent them from corroding.
Ambient temperature –5 °C to 35 °C (23–95 °F)
Battery requirements
Number of
batteries in
parallel
Cable specifications
Unit
Minimum
capacity
Maximum total extension length
(Positive battery cable + Negative battery cable)
20 mm
2
(AWG4)
30 mm
2
(AWG2)
50 mm
2
(AWG1/0)
60 mm
2
(AWG2/0)
CCA/EN 640 Amps
1 — — — —
20HR/IEC 80 Ah
CCA/EN 620 Amps
1
4.4 m
(14.4 ft)
6.7 m
(22.0 ft)
11.1 m
(36.4 ft)
13.4 m
(44.0 ft)
20HR/IEC 110 Ah
CCA/EN 620 Amps
2
6.2 m
(20.3 ft)
9.4 m
(30.8 ft)
15.6 m
(51.2 ft)
18.8 m
(61.7 ft)
20HR/IEC 110 Ah
CCA/EN 670 Amps
1
5.0 m
(16.4 ft)
7.6 m
(24.9 ft)
12.6 m
(41.3 ft)
15.2 m
(49.9 ft)
20HR/IEC 110 Ah
CCA/EN 670 Amps
2
7.3 m
(24.0 ft)
11.0 m
(36.4 ft)
18.3 m
(60.0 ft)
22.0 m
(72.2 ft)
20HR/IEC 110 Ah
CCA/EN 750 Amps
1
5.5 m
(18.0 ft)
8.3 m
(27.2 ft)
13.8 m
(45.3 ft)
16.6 m
(54.5 ft)
20HR/IEC 120 Ah
CCA/EN 750 Amps
2
8.1 m
(26.6 ft)
12.1 m
(39.7 ft)
20.1 m
(65.9 ft)
24.2 m
(79.4 ft)
20HR/IEC 120 Ah
Digital Electronic Control system reset / Rigging recommendation