Maintenance
90
5.
Put the outboard motor in a vertical posi-
tion. Using a flexible or pressurized filling
device, inject the gear oil into the gear oil
drain screw hole.
6.
Put a new gasket on the oil level plug.
When the oil begins to flow out of the oil
level plug hole, insert and tighten the oil
level plug to the specified torque.
7.
Put a new gasket on the gear oil drain
screw. Insert and tighten the gear oil
drain screw to the specified torque.
EMU29318
Inspecting and replacing anode(s)
Yamaha outboard motors are protected from
corrosion by sacrificial anodes. Inspect the
external anodes periodically. Remove scales
from the surfaces of the anodes. Consult a
Yamaha dealer for replacement of external
anodes.
NOTICE
ECM00721
Do not paint anodes, as this would render
them ineffective.
Recommended gear oil:
YAMALUBE outboard gear oil or Hyp-
oid gear oil
Recommended gear oil grade:
SAE 90 API GL-4 / SAE 80W API GL-
5 / SAE 90 API GL-5
Gear oil quantity:
F115BET 0.760 L (0.803 US qt,
0.669 Imp.qt)
F115BET1 0.760 L (0.803 US qt,
0.669 Imp.qt)
F130AET 0.760 L (0.803 US qt,
0.669 Imp.qt)
F130AET1 0.760 L (0.803 US qt,
0.669 Imp.qt)
FL115BET 0.715 L (0.756 US qt,
0.629 Imp.qt)
FL115BET1 0.715 L (0.756 US qt,
0.629 Imp.qt)
Tightening torque:
9 Nm (0.92 kgf-m, 6.6 ft-lb)
ZMU08122
Tightening torque:
9 Nm (0.92 kgf-m, 6.6 ft-lb)
1. Anode
1
1
ZMU08111
U6EK71E0.book Page 90 Monday, December 8, 2014 10:28 AM
