Yamaha F DIVERSION XJ6F Owner'S Manual Download Page 86

Page: 86 / 106

PERIODIC MAINTENANCE AND ADJUSTMENT

6-40

3. Insert a new bulb into the socket,

push it in, and then turn it clock-
wise until it stops.

4. Install the lens by installing the

screw.

NOTICE:

Do not over-

hten the screw, otherwise the

lens may

reak.

[ECA11192]

EAU24314

Replacin

the license plate

1. Remove the license plate light unit

by removing the screws.

2. Remove the license plate light

bulb socket (together with the
bulb) by pulling it out.

3. Remove the burnt-out bulb by

pulling it out.

4. Insert a new bulb into the socket.
5. Install the socket (together with

the bulb) by pushing it in.

6. Install the license plate light unit by

installing the screws.

1. Turn signal light bulb

1. License plate light unit
2. Screw

1. License plate light bulb socket
2. License plate light bulb

U1CWE4E0.book Page 40 Wednesday, August 6, 2014 2:59 PM

Summary of Contents for F DIVERSION XJ6F











































































































Search results

Summary of Contents for F DIVERSION XJ6F

Reviews:

Related manuals for F DIVERSION XJ6F

Brands by name

Popular brands

Yamaha F DIVERSION XJ6F, Owner'S Manual

Search results

Summary of Contents for F DIVERSION XJ6F

Reviews:

Related manuals for F DIVERSION XJ6F

Brands by name

Popular brands