Yamaha F DIVERSION XJ6F Owner'S Manual Download Page 21

Page: 21 / 106

INSTRUMENT AND CONTROL FUNCTIONS

3-6

Display

Con

itions

What to

Under 40 °C

(Under 104 °F)

Message “Lo” is displayed.

OK. Go ahead with riding.

40–116 °C

(104–242 °F)

Coolant temperature is dis-
played.

OK. Go ahead with riding.

117–134 °C

(243–274 °F)

Coolant temperature flash-
es.
Warning light comes on.

Reduce the load on the engine by riding
at a moderate pace, at low rpm, until
the coolant temperature goes down.
If the temperature does not go down,
stop the engine. (See page 6-46.)

Above 134 °C

(Above 274 °F)

Message “HI” flashes.
Warning light is on.

Stop the engine and allow it to cool.
(See page 6-46.)

ABS

U1CWE4E0.book Page 6 Wednesday, August 6, 2014 2:59 PM

Summary of Contents for F DIVERSION XJ6F











































































































Search results

Summary of Contents for F DIVERSION XJ6F

Reviews:

Related manuals for F DIVERSION XJ6F

Brands by name

Popular brands

Yamaha F DIVERSION XJ6F, Owner'S Manual

Search results

Summary of Contents for F DIVERSION XJ6F

Reviews:

Related manuals for F DIVERSION XJ6F

Brands by name

Popular brands