manualshive.com logo in svg

Yamaha F-20B, Owner'S Manual

Share
Download
Yamaha F-20B Owner'S Manual Download Page 19

Specifications and requirements

12

EMU33572

Mounting motor

WARNING

EWM01571

Improper mounting of the outboard mo-
tor could result in hazardous condi-
tions such as poor handling, loss of
control, or fire hazards.

Because the motor is very heavy, spe-
cial equipment and training is required
to mount it safely.

Your dealer or other person experienced in
proper rigging should mount the motor using
correct equipment and complete rigging in-
structions. For further information, see page
29.

EMU33582

Remote control requirements

WARNING

EWM01581

If the engine starts in gear, the boat can
move suddenly and unexpectedly, pos-
sibly causing a collision or throwing
passengers overboard.

If the engine ever starts in gear, the
start-in-gear protection device is not
working correctly and you should dis-
continue using the outboard. Contact
your Yamaha dealer.

The remote control unit must be equipped
with a start-in-gear protection device(s). This
device prevents the engine from starting un-
less it is in neutral.

EMU25695

Battery requirements

EMU25723

Battery specifications

The engine cannot be started if battery volt-
age is too low.

EMU36291

Mounting battery

Mount the battery holder securely in a dry,
well-ventilated, vibration-free location in the
boat. 

WARNING! Do not put flammable

items, or loose heavy or metal objects in
the same compartment as the battery.
Fire, explosion or sparks could result.

[EWM01821]

EMU36301

Multiple batteries

To connect multiple batteries, such as for
multiple engine configurations or for an ac-
cessory battery, consult your Yamaha dealer
about battery selection and correct wiring.

EMU44770

Without a rectifier or Rectifier 
Regulator

NOTICE

ECM01091

A battery cannot be connected to models

Battery rating (CCA/EN):

F15CE 347–411 A

F15CEH 347–411 A

F15CEP 347–411 A

F20BE 347–411 A

F20BEH 347–411 A

F20BEP 347–411 A

F9.9HE 347–411 A

Battery rating (20HR/IEC):

F15CE 40 Ah

F15CEH 40 Ah

F15CEP 40 Ah

F20BE 40 Ah

F20BEH 40 Ah

F20BEP 40 Ah

F9.9HE 40 Ah

6AG-9-79-1E0.book  12 ページ  ２０１４年１１月１０日　月曜日　午後４時８分

Summary of Contents for F-20B































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands