CLP-280/270 Owner’s Manual
61
Basic Operation
Connections
Connection to a USB storage device
If you connect USB storage
devices to both USB [TO
DEVICE] terminals, the devices
may not operate properly.
This instrument has two USB [TO DEVICE] terminals; one on the left of the
panel and one on the terminal at the front.
Both are the same terminal; however, both cannot be used at the same time.
Use the [SELECT] switch to select the desired terminal. Switching to “A”
selects the terminal on the left of the panel, while switching to “B” selects the
terminal panel at the front.
CAUTION
While the instrument is accessing data (such as in the Save, Copy and Delete operations),
do NOT use the [SELECT] switch. Doing so may corrupt the media or data.
Formatting USB storage media
When you execute a file-related operation with a connected USB storage
device, a message may appear indicating the device/media is unformatted.
If so, execute the Format operation (page 52).
CAUTION
The format operation overwrites any previously existing data. Proceed with caution.
To display the data in the USB storage device
Though the instrument supports
the USB 1.1 standard, you can
connect and use a USB 2.0
storage device with the instru-
ment. However, note that the
transfer speed is that of USB
1.1.
To view the data of the USB storage device on the CLP display, press the
[SONG SELECT] button to engage song selection mode or press the [FILE/
SONG SETTING] button to engage file/song setting mode. If you try to
engage these modes before connecting the USB storage device, press the
[EXIT] button to exit the mode and re-engage the mode.
TIP
To protect your data (write-protect):
To prevent important data from being inadvertently erased, apply the write-pro-
tect provided with each storage device or media. If you are saving data to the USB
storage device, make sure to disable write-protect.
USB TO DEVICE
SELECT
USB [TO DEVICE] terminal A
USB [TO DEVICE] terminal B
Select the desired terminal
TIP
